If you have a DualShock 4 controller, you may have experienced the battery life dwindling from eight hours to six hours between charges. If you are one of the many users of the DualShock 4 controller, you may be wondering what to do to extend its life span. This article will cover several options, including how to use a USB quick charger with the controller, and how to charge the controller while using another one.
Battery Life Of A Dualshock 4 Controller Declines From 8 Hours To 6 Hours Per Charge
In order to ensure the longest battery life possible, you should fully charge your DualShock 4 controller between gaming sessions. This is because plugged-in controllers have a longer battery life. This is because they are less likely to be left unused. To maximize battery life, try to fully charge your controller before playing games. Also, keep your controller plugged in when not in use.
The PlayStation 4’s battery is the weakest link of the aging DualShock 4 console, but you can prolong its lifespan by using tips to maximize its performance. The first step is to test your controller for known problems. The battery in your DualShock 4 controller should last between 8 hours and six hours before it needs to be recharged. In case the controller is damaged, you can reset the device to factory defaults.
Another way to extend the battery life of a DualShock 4 controller is to reduce the volume. You can do this in the PlayStation 4 settings in Settings > Devices, Controllers. The rumble effect is also a battery drain, so turn it off and enjoy the game for longer. To disable the rumble effect in your DualShock 4 controller, simply go to the Settings menu and tap the Rumble feature.
Another step to extend the battery life of your DualShock 4 controller is to use a wall charger or a USB adapter. This prevents any power surges from damaging your controller. A USB wall charger must be compatible with your PS4 console and its charging port. If you don’t use the controller while charging, it may be due to a dirty USB port or a broken cable.
If you are unable to play for an extended amount of time, you can adjust the delay in which your DualShock 4 will shut down. Turning off the controller after ten minutes is a good option, but it can also be set to turn off after 30 or 60 minutes. A delay of 10 minutes will minimize the battery drain while the controller is inactive. You can also adjust the delay manually by pressing the PlayStation button in the center of the controller for 10 seconds.
When comparing the battery life of the Xbox One controller to the DualShock 4, the former is the better option. The Xbox One controller’s thumbsticks are more responsive and have better feedback than the DualShock’s, and the Xbox One has a touchpad that acts as a keyboard replacement. The DualShock 4 controller also features a gyroscope and accelerometer that make it easier to aim in games, such as Fortnite or Rogue Company.
PS4 controllers usually last seven years, but the battery life of the DualShock 4 controller is much shorter. The battery life of a DualShock 4 controller falls from 8 hours to 6 hours per charge, depending on use. The DualShock 4 controller’s battery life is also shorter than that of the Xbox One or Nintendo Switch Pro controllers. This is one reason why you should always charge your controller before you use it.
Using A Usb Quick Charger With A Ps4 Controller
If you’re wondering whether you can use a USB quick charger to charge your PS4 controller, you have a few options. While some phone chargers can charge your PS4 controller, others don’t. Regardless of the charger you’re using, be sure to check the amps and voltage. Generally, a phone charger will work as long as it has a specific output voltage.
To test whether it’s your controller or the charging port, try plugging your controller into another USB port. Sometimes, the ports can get dirty and cause a problem with power transfer. To clean out these ports, use a flashlight or canned air. Another option is to clean the charging port using a toothpick. Once the controller is fully charged, it’ll start vibrating and charging quickly.
A USB quick charger for a PS4 controller should be rated for either one of the two types of charging connectors. The standard USB connector is usually the most common type of charger. Most devices can accept up to 2A or 2000mA, but not all. In order to be safe, use a USB quick charger with caution, as the pins on the controllers can vary from generation to generation.
Sometimes a PS4 controller won’t charge when plugged into a USB port. Check to make sure that the cable is properly seated in the charging port and is plugged in tightly. The controller could also have a battery that is dead. If this is the case, you’ll have to replace the battery. If the problem continues, you should contact the manufacturer of your PS4 controller for a replacement.
Ensure that you disconnect your PlayStation 4 controller after use. The controller’s battery should be completely discharged once every two to three months to avoid damaging the controller. To help prolong the battery life of your controller, you can lower the brightness on the controller. This can be done by going to the PS4’s Settings and selecting Devices. You can also adjust the brightness in the brightness settings on the controller.
When using a USB quick charger with a PS4, make sure to select a model that supports the type of connector used for charging your PS4 controller. Many newer phones are made with a USB quick charger, which uses two separate cable outputs, one rated for 5v, the other for 9v. It’s important to remember that PS4 controllers draw 800ma of power, so you’ll want to be sure your USB charger supports the right port.
Ensure that you use the proper charging adapter for your PlayStation controller. PlayStation controllers need specific voltages and currents, and charging them with a charger that isn’t compatible with the PS controller battery will only make the battery charge slowly, defeating the purpose of using an alternate charger. You can also use the proper adapter for PS3 controllers. It performs the handshake needed for the controller to communicate with the charger.
Charging A Ps4 Controller While Using A Second Controller
If you want to use the second controller to play a game on PlayStation 4, you must ensure that your first controller is charging. If you don’t see the light bar on the controller, then you may have a faulty USB cable or a bad controller battery. If your controller is not charging, you may need to restart your PlayStation 4. To do this, you need to go to the settings menu on your PlayStation 4 and tap the Settings button.
To charge your PS4 controller, you must connect it to the PS4 console’s USB port. Once the controller is connected to the system, you will notice a light on the back of the controller blinking orange. You will also be able to tell when your controller is charging by pressing and holding the PS button on your second controller. The screen will also display a battery level icon.
If the charging cable is not working, you may need to reset the PS4 console and the second controller. If this doesn’t work, you can try to reset the PS4 by pressing the small hole on the controller for 5 seconds. If it still does not work, you may need to replace the controller. You can also try to charge the controller by connecting the PS4 console to another power source, which can provide enough power to recharge the controller.
If your PS4 console is in rest mode, you can connect the controller to it with a micro-USB cable. This will allow you to download in-game content or games, while the controller recharges. However, you must be careful not to use the micro-USB port while charging your PS4 controller. Otherwise, you may damage the Micro-USB port. This is an easy way to charge your controller while you are using the second one.
To do this, make sure that you have your PS4 on and connected to your PS4 system. You must also make sure that the second controller is turned on before charging. You should also charge the controllers once a year or so, to increase their battery life. To do this, you should hold the PS button and press the Share button simultaneously for five seconds. After this, the second controller should appear on your PS4 system as a device.
When you’re in-game and notice the charging of your first controller, you can pick up the second one to use. If you’re playing with two controllers, you should keep one charging while the other is playing. This can be done by using a PowerA Charging Cradle for both controllers. Once you’ve done this, you can use the second controller to play the game without interruption.